![]() |
When you and our technicians plan the installation of a Katchakid removable pool fence you want to make sure it will effectively block all access points to the pool area. You’ll also want to consider access to yard maintenance, pool equipment, play areas for the children, and access to grass for pets. A Katchakid representative would be happy to consult with you regarding your choices of pool safety barriers based on the configuration of your pool and yard.
The Katchakid removable pool fence is a concentric tension-based fencing system which uses a series of 14-foot sections of fencing panels. The panels are manufactured from Textilene, a durable polyester woven mesh coated in a marine grade polyvinyl.
The fence is anchored into non-conducting, non-corrosive polypropylene sleeves that are core drilled four inches deep into the pool’s decking or other solid surface. We provide deck caps to cover the deck sleeves and give a finished look. The fencing panels are connected at the top of each pole by a two inch safety latch.
![]() |
In most cases the fence should be positioned a minimum of 24 inches from the water’s edge. This makes it safer for you and your children or guests to walk around safely inside the fence while maintaining the pool, or retrieving a person or object from the pool. We do not recommend the fence be located any closer than 18 inches from the waters edge for safety reasons. Swimmers need space to pull themselves out of the water and to sit on the edge of the pool.
![]() |
Sometimes the path of the removable pool fence traverses across areas where there is only grass or dirt and in these situations concrete footings are required at every fence post interval. Concrete footings are placed every three feet or less. Gates must be installed onto firm decking (i.e. concrete, paved stone, etc).
The primarily area for the pool fence positioning must be across a solid surface such as concrete, pavestone, flagstone set in mortar over concrete, or coated concrete decks, preferably level. Remember, the fence is tension-based, and must be set into a rigid structure. This surface must be at least four inches thick and six inches wide to facilitate proper tension and installation.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
While we would all like to have our fences go in a straight line, most of the time it’s not possible. We need to provide bends or gradual turns to conform to the curvature of your pool or deck. A removable pool fence should avoid tight turns, U-turns, S-turns and 90- degree turns whenever possible, as they can create odd and opposing angles in tension- based fences. Katchakid, Inc. uses 45 degree turns for an aesthetically pleasing, safer and stronger tensioned-based fence.
![]() |
Home | Child Pool Safety | Dealer | DIY Katchakid Pool Safety Nets | Fitting Components | Fitting Components 2 | Fitting Components 3 | Free estimates| Pool Cover | Is a Pool Safety Fence right for you? | Katchalert | Pool Covers | Pool Safety FAQ | Pool Safety Fences | Pool Safety Nets | Pricing | Katchakid's Safety & Quality Assurance Checklist | Testimonials | Water Features, Ponds & Rockeries | What Makes A Good Safety Net | Why Katchaleaf® is the Pool
owner’s best choice